Hot search:
 

Optical Line Protection System Card

Click on the image to check the artwork
unit price: negotiable
min amount:
amount:
period for delivery: Consignment Deadline Days
area: Guangdong
Expiry date : Long Effective
last update: 2019-06-24 12:13
view count: 323
enquiry
Company Profile
 
 
Product details

Features

(1)Support automatic switching of primary and secondary routes

(2)Support manual and automatic switching modes 

(3)Low switching time <20ms

(4)Low insertion loss: <4.5dB 

(5)Support automatic return to the Primary 

(6)Support manual, automatic working mode settings

(7)Support for switching threshold settings


Specification

Parameter

1:1

1+1

unit

Operating wavelength

1310±50nm, 1550±50nm

nm

Optical power range

+23~-50

dBm

Accuracy of the optical power

±0.25

dB

Detection light power resolution

±0.01

dB

Return Loss (dB)

≥55

dB

Polarization Dependent Loss (dB)

≤0.05

dB

Wavelength dependent loss

≤0.1

dB

Insertion Loss (dB)

<2.5

<5.5

dB

Switch speed

<35

<15

ms

Dimension (mm)

20.5(H)× 195(W)× 252(D)

mm

Environment

Opterating Temperature (℃)

-10℃~+60℃

Storage Temperature (℃)

-40℃~+85℃

Relative humidity

5%~95% Non-condensing

 

Power Consumption

≤5

W


Optical line protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.


Optical line protection switch provides both Manual and Automatic switching mode. 

In Manual mode, the system switches optical path only based on the commands from user. 


In the Automatic mode, the system switches based on the power level detected and the preset threshold. 

Under automatic mode, the system can be set to be revertive or Non-revertive modes. Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back.



http://www.htfwdm.com/

Total0bar [View All]  Related Comments
 
More>other products

[ ProductsSearch ]  [ Send Fav ]  [ Share ]  [ Print ]  [ Send Report ]  [ Close ]

 
Home | Products | Suppliers | News | Tradeshow | Sitemap | Message | RSS Feed