Click on the image to check the artwork
By certification 
Introduction
EAST GRACE is a professional Ringlock Scaffolding Vertical manufacturer founded in 1990, Its automatic scaffolds welding production lines are of most advanced level both home and abroad, and produces 60000 tons of scaffolds annually.
Ringlock Scaffolding Vertical Standard
Application: SCAFFOLDING
Product Information
Ringlock Scaffolding Vertical Standard is one of the main compoents used to connect the horizontal ledger and brace so it creats an entire scaffolding system.
Features
● "The eight angle holes on each single ring provides versatility in handling different working
heights and structural configurations."
● The spacing between 2 rings are 0.5m from the center to the center.
● Small hole on the rosette is for the ledger, and the bigger hole is for the diagonal brace
● The spigot makes the standards possible to connect each other.
Technical Information
The rosette is 10mm thickness. Material: Q235 carbon steel. It is made by punching.
The tube dimensions is OD48.3mm by 3.20 thickness. Q235 or Q355 as requested.
Finishing: hot dip galvanise.
ITEM |
DESCRIPTION |
WT.KGS/LBS |
|
RV10 |
1 Ring (0.5M) Vertical Standard W/ round spigot |
3.2 |
7.1 |
RV33 |
2 Ring (1.0M) Vertical Standard W/ round spigot |
5.6 |
12.3 |
RV411 |
3 Ring (1.5M) Vertical Standard W/ round spigot |
7.9 |
17.4 |
RV66 |
4 Ring (2.0M) Vertical Standard W/ round spigot |
10.4 |
22.9 |
RV82 |
5 Ring (2.5M) Vertical Standard W/ round spigot |
12.9 |
28.4 |
RV910 |
6 Ring(3.0M) Vertical Standard W/ round spigot |
15.3 |
33.7 |
Instructions for Use
Put the ringlock vertical standard in position.
Connect another post by the spigot if it needs to be extended.
Erect the horizontal ledger but hamming the rosette until it stays tighted.
http://www.egt-scaffolding.com/
